AK Bayonet Types

The easiest and least expensive type of Kalashnikov bayonet collection would be to represent one of each type of AK bayonet.. Give it a try !

4-9-06-009

Kalashnikov Bayonet Types 

  Chapter One

There are four basic knife types found for AK bayonets plus some variations, which do not fall in these categories. There are also three basic scabbard types. Combinations of these types are what allow for identification of the country of origin for these bayonets and the type of AK they were originally used with.

00-7-23-07-010

In this book the bayonets have been classified into four basic knife types as follows:

AK47 Type – characterized by ears on the pommel, which go around the barrel of the rifle to aid in mounting; a handle with a scale on each side; and a long, straight spear point type blade with fullers on each side. (See figure 1 .A.)

AKM Type I – characterized by a large bulbous handle of plastic material, which has a slot for a bayonet lug for attachment to the rifle and a hole for a wrist strap and a Bowie type blade with a clip point and sharpened only on one side and without any fullers. (See figure 1.B.)

AKM Type Il/Early AK74 – bayonet lug and a hole for a wrist strap; a solid plastic handLe; and, again, a Bowie type blade with a clip point and sharpened only on one side and without any fullers. (See figure l.C.)

AK74 Type – characterized by a return to a solid plastic handle without a steel pommel but with ridges which substitute for finger grooves; and a return to a spear point blade with a very unique sharpening pattern and again no fullers. (See figure 1 .D.)

The other knife type variations include the East German KM87 bayonet for their AK74 variant, the MpiKM(S)74, the distinctive knives North Koreans used for their late AK47 and AKM type rifles, the bayonets used by the Finns for the Valmet series of rifles, the bayonet used by India for the INSAS Rifle, the Czech CZ58 bayonets and the Chinese Folding Spike and Type 81 bayonets. These will be shown and discussed in the relevant chapters.

00-003-types

From Page 3 Kalashnikov Bayonets
© 2002 by Martin Ivie
Reprinted with permission of the author

Kalashnikov Bayonet Scabbard Variations
  Chapter One, cont.

   The three scabbard variations have been classified as follows:

   AK47 Type – straight steel scabbard with webbing belt loop permanently attached via metal loops welded to the scabbard. (See figure 2.A.)

   AKM/AK74 Steel Type — steel scabbard with a wire-cutter attachment riveted to the
lower end, a rubber insulator installed around it at the throat and a belt loop attached to a welded ring via a snap hook or a frog type belt loop. (See figure 2.B.)

   AKM / AK74 Plastic Type — plastic scabbard usually with wire-cutter attachment molded in to the lower end; and usually, a belt loop attached to a molded in bar via a snap hook. (See figure 2.C.)

   As with the knives, the Valmet, CZ58 and Type 81 types will be discussed in the appropriate chapters.

Another type-classification term used in this book is AKM Type I transitional bayonet.
This is used to refer to the combination of an AKM Type I knife and an AKM/AK74
Plastic Type scabbard.

00-004-types2

AK Bayonet Types

  • AK47
  • AKM Type I
  • AKM Type II / Early AK74
  • AK74

AK47

image

AKM Type I

image

Transitional (Mixed Bayonets and Scabbards)
image

AKM Type II / Early AK74

image

AK74

wpid-20130526_153055-1_wm.jpg